🎉🧪 You can now become an official Cryptotester member by minting the new Tester Membership NFTs. 🥳🎊
Click here for details ⇗

Logo CryptotestersLogo Cryptotesters



What is Hop and how does it work?

Emanuel Coen

about 1 year ago ·

7 min read

cryptotesters podcast image

In this post, we’ll explain how Hop works in low complexity terms. We hope it provides you with a good understanding of the problem Hop is tackling and how they’re solving it.


At this point, it’s probably not even worth explaining that Ethereum needs to scale urgently. It’s common knowledge. Fees to transact on the Ethereum base layer have skyrocketed in the last year as usage of DeFi and NFT applications has surged.

The good news is that there are dozens of talented and well-funded teams working on so called Layer-2 and scaling solutions to help Ethereum scale and accommodate for more applications and users.

What are Layer-2s

There are different categories of scaling solutions: sidechains such as Polygon, Optimistic Rollups such as Arbitrum or Optimism as well as zk-Rollups like zk-Sync.

While they have differences all Layer-2 networks:

  1. Provide an execution environment that can process transactions in a similar way to Ethereum itself (a.k.a EVM compatibility) but at a fraction of the cost

  2. Derive their security (to varying degrees) from the Ethereum base layer

  3. Have a native bridge to facilitate transfers of assets to and from Ethereum.

In short, they increase the throughput of Ethereum by moving computation and data storage off-chain while keeping some data per transaction on-chain.

This is groundbreaking. It means that applications hosted on a Layer-2 network are an order of magnitude cheaper and still inherit the data security and censorship-resistance of the Ethereum base chain.

However, there are also a few challenges posed by the rise of Layer-2 networks. For one, they fragment the DeFi space. Prior to the rise of Layer-2s all the DeFi applications were living on the same Ethereum mainnet platform, allowing applications to be composable (integrate with one another) and users to transfer their funds easily from one application to another.

In a Layer-2 world, applications are living in somewhat isolated environments.

Although Layer-2 networks have “native bridges”, the process to move tokens from one scaling solution to another or even back to the Ethereum base layer via these bridges is slow and expensive.

The speed at which data can be passed from a L2 to its L1 base chain in order to facilitate a withdrawal is known as its ”exit time.” For a frictionless user experience and in order to make L2’s feel like they’re a native extension of Ethereum, these exit times should be kept to a minimum. Even better, they should be instant.

Hop solves both these challenges by creating bridges between every Layer-2 network with Ethereum acting as the central hub that each scaling solution is connected to. Using Hop, users can move their funds (hop) between different Layer-2s or withdraw their funds from a Layer-2 to Ethereum mainnet instantly. hop_protocol_layer_2_Ethereum_optimism_arbitrum_polygon_bridge (1).png

How does Hop work?

Hop is essentially a multi-network bridge. It’s technology agnostic and can be applied to any EVM-compatible chain.

There are two core pieces to the Hop protocol architecture that make this possible.

  1. A cross-network Hop bridge token that can be quickly and economically moved between L2's or claimed on layer-1 for its underlying asset.

  2. Automated Market Makers to swap between each Hop bridge token and its corresponding Canonical Token on each rollup in order to dynamically price liquidity and incentivize the rebalancing of liquidity across the network.

Let’s go through this step-by-step.

The Hop bridge

Every Layer-2 has a native token bridge. If you move Ether (ETH) to Optimism for instance via the native Optimism bridge, you receive Optimism Ether. In technical jargon this is called the “canonical token”. Think of it as the original representation of ETH on the Optimism network.

However, this representation of Ether only exists on Optimism and withdrawals via the native token bridge are subject to the long exit period mentioned earlier.

To convert your Optimism Ether to Arbitrum Ether you would have to withdraw back to mainnet via the “native” Optimism bridge, wait for seven days and then convert mainnet Ether to Arbitrum Ether via the Arbitrum bridge to use it in the application of your choice.

This is where the multi-network Hop bridge comes into play. Hop has its own Optimism bridge and its own Arbitrum bridge which are called Hop Bridges.

The Hop bridge issues Hop tokens on each network it supports. For instance, if a user wants to deposit 4 ETH on Optimism via Hop, Hop would issue the equivalent amount of Hop ETH (hETH) on Optimism. Inversely, hETH can be redeemed for its underlying asset on Ethereum mainnet, which burns the hETH on Optimism.

Lastly, hETH can also be redeemed for hETH on any other rollup or sidechain supported by Hop. In this case hETH would equally be burned on the origin rollup and minted on the destination.

But how can these Hop Tokens be transferred so easily between different networks given data and asset transfers via the native bridges take up to 7 days as we discussed earlier?

The Bonder

This is where the bonder comes in. The Bonder fronts liquidity on the destination in exchange for a small fee.

The Bonder knows that they will eventually receive their funds back because they run a verifier node on each rollup and can verify transactions as they’re made.

The Bonder can then provide up-front liquidity on the destination rollup in order to fulfill the transfer immediately. Eventually, when the big batch of transactions is confirmed on mainnet, the bonder’s funds which were locked are restored. The_Bonder_Finale.png

For example, a user might want to withdraw their hETH and receive ETH instantly. The Bonder knows that the withdrawal transaction has been triggered and is on its way to be settled on mainnet.

With this information, the bonder sends hETH that they have locked up on the destination chain (in our example mainnet), to the user’s requested wallet address. A couple of days later, The Bonder’s collateral is made available again as the transaction batch has settled.

The immediate liquidity provided by the Bonder enables Hop Tokens to be quickly and economically moved between all the supported networks.

Initially, Hop will start with only a couple of whitelisted entities running a Bonder but in further iterations of the Hop protocol anyone will be able to be a Bonder. Note, that The Bonder can not steal any funds or censor transactions but the task comes with technical overhead and is quite capital-intensive as liquidity needs to be maintained on multiple networks.

The worst case scenario would be that all Bonders are offline in which case no transfers would get bonded. When a Transfer doesn't get bonded, it is delayed by the normal exit time of the L2 but will still eventually go through.

But wait a minute, who wants the Hop Tokens (e.g hETH or hDAI)? Don’t I need the original (canonical) ETH to use Uniswap on Optimism?

The Hop AMM

The last missing piece in the Hop protocol is the conversion of Hop tokens into the original or “native” tokens of the rollup in question. Afterall, these are the tokens that the end user needs to use any of the applications.

For that purpose, Hop deploys an Automated Market Maker (AMM) on each rollup that makes Hop tokens liquid against the canonical token on the Layer-2 network. For instance, if a user sends ETH to Optimism from Mainnet, the Hop Bridge would first issue hETH to the user on Optimism and subsequently swap it against Optimism ETH on the Hop AMM. Naturally, this all happens under the hood and looks like one transaction to the end-user. Hop_Graphic_3.png

Like on Uniswap, anyone can become a liquidity provider in any of the Hop pools and earn swap fees on the trades. Since the liquidity is provided on pairs of the same asset (e.g hETH- Optimism ETH), which can both be redeemed for exactly the same amount of their mainnet counterpart, there is close to no impermanent loss risk, making it quite attractive to be a liquidity provider.

In cases where the price between Hop tokens and their native counterpart does deviate, arbitrageurs can quickly step in and rebalance the prices for profit. Imagine Optimism ETH trades at a discount relative to hETH for instance. A profit driven arbitrageur could then simply mint hETH by sending ETH across the Hop Bridge. The Arbitrageur would then use their hETH to purchase the discounted Optimism ETH by trading with the Hop AMM.

Note that in this example, to finish the arbitrage trade, the Arbitrageur would have to exit via the Native Optimism Bridge and face the 7 day liquidity lock up. If they would use the Hop bridge to withdraw instantly, they would effectively trade back into the Optimism ETH - hETH market they just arbitraged and lose their profits.


In a nutshell, Hop tokens can be moved instantly across all the supported networks thanks to The Bonders who collateralize transfers and take the liquidity lockups on them in exchange for a small fee. Hop tokens can then be swapped against the canonical tokens of the network on the Automated Market Maker exchanges deployed on each network.

This is all happening in an automated way and users don’t have to understand any of the complexity behind it. They can just reap the benefit of moving tokens quickly and seamlessly between the networks they want to use from one place.

Hop can also be integrated natively into application interfaces of Layer-2 projects like Uniswap or Synthetix to facilitate their users to withdraw their assets instantly, without even knowing that it’s using Hop under the hood.

This is super exciting as it helps overcome fragmentation in the DeFi’s space caused by applications existing on different Layer-2 networks and significantly improves the user experience.

Emanuel Coen

about 1 year ago ·

7 min read

Latest Content

July 2022

Social network goes 3.0

July 2022

Azuro Protocol: Can the betting industry...

April 2022

Polynomial The New DeFi Derivatives Powe...

March 2022

Courtyard: Bringing Billions of Dollars ...

February 2022

The Rise of Music NFTs - Will this unlea...

January 2022

Deep dive into Perpetual Protocol v2

January 2022

Deep dive into Treasure DAO

January 2022

Why you should use Cowswap for all your ...

Cryptotesters Logo

We are a multi-faceted team of crypto enthusiasts based in Berlin.

© 2021 cryptotesters UG

Stay up to date!  Sign-up for a monthly roundup of the newest crypto products


Cryptocurrency exchanges

Crypto wallet guide

Crypto savings accounts

Defi lending rates

Crypto cards

Exclusive crypto deals

Ethereum staking






Twitter logoLinkedIn logoFacebook logo
Cryptotesters Logo

We are a multi-faceted team of crypto enthusiasts based in Berlin.

© 2021 cryptotesters UG